How to Make a Beautiful Kitchen Garden

You are lucky enough to own a small unused space in the garden, which you would love to use? Good! As well as enjoying the cool during the long summer days, you can also eat out and cook your outdoor meals, but you must make sure to fix a cooker that allows you to do this without in any way disturbing the neighborhood, taking advantage of all possible comfort.

The many shops that sell outdoor furniture, will offer you many opportunities to realize your dream but of course you will have to bear some costs, although not excessive, and moreover, outdoor kitchens are not equipped with sink and refrigerator. But you can pay much less than you can imagine, if you adapt using some old items you have placed in the attic and you can use to build a kitchenette for your evenings with friends. Here we like to share useful tips on how to make a beautiful kitchen garden.

Usually in most of the gardens lies a sink, and then you can add to it near a kitchen equipped with a gas cylinder, and if you like, you can place a small barbecue, very useful for your grilling in the company. As a shelf, use one of those old tables that you had stored in the attic, and when you have cleaned and stripped with the utmost care, give it a coat or two of varnish, letting it dry before you go over the second hand and cover it with a plastic place mat in a floral pattern, to give a cheerful touch. Above his plan, you can lean pots and various ornaments for cooking. If you have placed on the stove in the garden there is a small wall, we can install in it some wall cabinets, which will be very useful for storing crockery and various pottery.

In the unfortunate event that the guest does not have to use this support wall allowed to replace it, you can buy some furniture in sturdy resin garden, equipped with elements to keep the pots, and with a couple of drawers for storing cutlery and any tablecloths. Better still if they are equipped with strong and capacious shelves that allow to support the accessories that usually used for cooking. It is highly inadvisable, locate wood cabinets because with the sun and other weather conditions, this material could come unstuck and inevitably deteriorate. Near the kitchen, placed a table with chairs, perhaps under a gazebo or a pergola.

Try to cover the area where you eat with some towels sunscreens that protect from the heat, so that the area where you will spend your afternoons and your evenings in company, remains fresh. Of course this is the cheapest option, but if you want a better solution, though slightly more expensive, you can opt for one of those outdoor kitchens that are not afraid of any kind of weather, even in winter. You can buy it in masonry or steel: usually it is supplied with every comfort (excluding the sink and the refrigerator, you have to buy separately. Regarding the latter, the ideal is one of those garden that work using electricity, but that with the aid of ice blocks retain the same way as fresh food and drinks.

How to Pave a Porch

Plans to make a nice coating on the porch is very appreciated because it still represents the input note of your home. To pave a portico takes several precautions, as this is an area that is not internal, but at the same time is not external, but something in between, such as an introduction of the house. Ideas on how to do may be many, clearly it depends on disposable income and own taste. One aspect that you need to go look is definitely the type of coating and its invoice. This must be a non-slip coating in that, in any case it is an external, you must not run the risk of slipping due to rain; while another aspect is that it is a place for certain refined verses, where it can be furnished with a typical furniture for the outside such as chairs, sofas, coffee tables and a real table to get together in the evening with friends to a dinner. So let’s see some steps for covering a porch.

The first solution involves a great classic that is the clinker: it is a type of flooring to reddish, slightly glazed but mainly a rough stone. The clinker is combined with the very wooden style, or more conservative. Let’s say that the clinker is a material that is well suited for these types of coatings since it is quite elegant but ideal for an outdoor environment.

Another solution is to make a wooden porch. The wood is very appreciated for this type of work, it is natural and definitely very nice and easy to match especially when the rest of the structure is also made of wood. However beautiful does have its flaws: the maintenance. Wood is a material that requires a lot of maintenance, especially in summer, it must be sanded and repainted to avoid ruin. It is inadvisable a material for environments near the sea because salt would ruin it and therefore requires a higher maintenance.

If you want to go to a great classic and certainly very cheap, you can use the porphyry. This material is widely used for outdoor and goes quietly in traditional and modern environments, thanks to its grain a bit ‘rough and irregular shape. It will be sufficient to break the stone each time before mounting, creating a sense of order, but at the same time to completely irregular shape.

How to Build A Garden Shed

In home garden lacks an artifact where hospitalize all of our useful tools to gardening, and we often have to leave them outdoors, or to occupy spaces that are useful for other purposes. To build a garden shed, you need a good preparation mentally and excellent manual ability to create and adapt the individual pieces to their needs. So let’s see how to proceed.

Make sure you have on hand:

  • Pine boards with a thickness of 3 cm
  • Joists of 5×5 cm
  • Self-tapping screws
  • Angular L
  • Canadian type tiles

The wooden houses, compared to reinforced concrete construction, are more comfortable in every season. The wood, due to its processability and its technical characteristics, is considered the best material used in construction. In America, most of the houses built on two or three levels, are constructed entirely of wood or assembled beams, sealed with plaster panels. In our country, there is no real culture of wooden home, intended as a principal residence. Numerous are the wooden houses, like the garden cottages available for wood or tools or do dressing room, in the presence of a swimming pool.

The first thing to do is to prepare the necessary material, in this case for a small house of about 10 square meters. The first work to be done is the formation of the base: it must be absolutely flat and perpendicular. It must then cut five joists from 5×5 cm of the expected length, lay them on the ground, at a distance of 50 cm from each. Subsequently, the boards resting on the beams, previously cut to measure, making sure that the tongue-female fits together, then secure them with the self-tapping screws, continuing until completion of the entire base.

Take now the other four pallets, of the type used for the construction of the base, fixing one for each corner of the base, using the angle iron to L. At this point, to build the walls, you will have to cut to size the tables, on a obsolete other, using the male and groove, and attach to the four beams, leaving aside for the moment the wall dedicated to the door.

Finished to prepare the walls, you will have to build the roof, using always the joists from 5×5 cm, which will locate on the top of the walls of the four beams, fixing them with the use of the angle in L, doing so in order to pass on part of the weight of the roof on the walls. At this point, the fixed tables, one beside the other, until completion of the roof, making them protrude, for each side of the house, so that in case of rain the water drains away.

Now roll out on the roof tiles, starting from the side of the roof slope, fixing them with the specific nails, at the point where the next tile will cover the fixing nail, up to the highest point of the roof. Now we need to build the gate. Put in four earth joists, forming a rectangle, fixate above the boards, with the help of self-tapping screws. Completed the construction of the port, it must be fastened to the structure, using simple metal hinges. The fact remains that only finishing as the last step. The most appropriate choice for a good finish, is to pass three coats of primer and then a coat of transparent flatting, to give a nice touch of gloss to the lodge finally over.

Learning The Secrets About Resources

Why You Should Apply Sealcoat for Your Driveway If you have a driveway or a commercial parking lot they are made of asphalt, you need to make sure that you give due care. It is important to give the best care if you wish to have it serve you for a long time. It can be damaged by water penetrating beneath the asphalt layer or the ultraviolet sun rays working on the asphalt layer. These are the highest risk that you should be keen on though mechanical damage as well. It might cost you some money to keep the asphalt surface protected but not as much as replacing it. You will be on the way to replacing them if you don’t give proper protection. If you notice cracks or potholes on the sources of the driveway or parking lot, you need to refill them. If there are cracks and potholes, water will enter through them to the asphalt layer and base layer where it will cause damage. Over time, this will make the whole surface bad and you will have to redo it again. Note that this time you will bear higher costs since there will cost for the removal of the remaining parts and preparation for the next installation. The cost of the new installation will still be yours. If you refill the cracks and potholes early enough, you prevent this from occurring. Before any refilling is done, let the cracks or the hole be thoroughly cleaned. Once cleaned, the refill materials can be applied. This will prevent entry of water to the asphalt layer and protect your driveway from water damage. Ultraviolet rays can damage the surfaces for your driveway. Most of the cracks develop mostly due to the sun scorch. These cracks then develop into potholes that allow penetration of water. As such, you are sure that protecting the surface from sunlight protects it from water as well. The best way to protect the surface it to apply a sealcoat. The application of the sealcoat should be in two layers. the application of the first layer ensures that the cracks are sealed and ensure that no light and water can penetrate the surface. The next layer can be applied as spray. Uniform coating is made possible through a spray.
Lessons Learned About Sealing
Having the right equipment for the sealcoat is very important. The equipment are provided by the sealcoat manufacturers at a place. If you don’t want to buy the sealcoat equipment, you can hire a sealcoat expert to assist you with it. Keep your driveway or parking lot safe with sealcoat application and you will be happy for several years.News For This Month: Supplies

STUdio Pet Company Announces New Website Offering Custom Kennels for Dogs


(Lafayette, LA) Pet owners throughout the U.S. know the importance of having a safe place for their dog. Unfortunately, many of the kennels available on the market are unsightly, detracting from the otherwise appealing décor in the home. As a result, dog’s safe places are often stowed away in corners or rooms by themselves where they aren’t seen.

In an effort to help provide dog owners with the kennels they want for their pets and a sturdy, stylish and functional piece of furniture, STUdio Pet Company offers custom kennels. These kennels have a dual purpose, serving as a safe retreat for dogs, as well as stylish side tables, coffee tables and more.

“Our goal is to provide pet owners with the kennel they need for their dog, as well as stylish décor for their home,” stated owner Mandy Bonvilian. “We have partnered with a manufacturer to produce our kennels that have over 70 years in the custom pet kennel creation industry, we take pride in the products we provide and our solutions are unmatched in this industry.”

While the pet kennels found at are offered at a premium, they provide pet owners with a piece of functional furniture, in addition to being a “safe place” for their dogs. Each custom kennel is made with the highest quality materials to ensure it not only meets customer’s rigorous standards but to ensure it is also durable and long-lasting.

“Humans and pets alike love our kennels,” continued Bonvilian. “For us, it really is a labor of love. Our entire idea for the company began with the need we had for a better solution for our own pet. Now, we are able to offer these custom solutions to other pet owners who demand something better.”

Customers interested in the custom pet kennel and furniture options provided can browse the selection by visiting Each kennel is tested for structural integrity, with the ability to withstand the weight of any dog that may get on it. Additionally, a portion of the profits of each kennel sold go to animal welfare causes.


STUdio Pet Company is a business based out of Lafayette, Louisiana and ran by husband and wife team John and Mandy Bonvillian. Together the couple took their love for dogs, along with John’s entrepreneurial spirit to create the custom kennels they sell today. The goal of the company was to provide better, more aesthetically pleasing pet kennels for homes that would enhance the décor, rather than detracting from it. With a manufacturing company producing the kennels that has over 70 years of experience, there is no kennel available on the market that matches the quality of uniqueness of the products offered by STUdio Pet Company.

The Hoth Announces Tattoo Contest with $1000 Prize


(St. Petersburg, FL) The Hoth, a company known for quality SEO services, has announced it is hosting a tattoo contest that is decided by fans. The contest includes 32 contestants, all with real tattoos. The bracket-style predictive voting tournament, which is determined by fan voting has begun. All fans have to do is participate is cast their votes for the bracket. Once the options are narrowed down, a winner will be named.

“At the end, there will be four winners who will receive prizes,” stated company representative Trey Wallrapp. “One prize is given for the most points received from predicting winners, and the top three tattoos decided by votes will also receive prizes.”

All of the tattoos seen in the contest are real. There are actual cash prizes for the best bracket, as well as first, second and third place for the tattoos. During the contest, first round voting is worth a total of 10 points, second place is worth 20 points, third place is worth 40 points and the semi-finals are worth 80 points. In the championship round, the tattoos chosen will receive 160 points.

“We are excited about the hoth tattoo contest and how it is really getting our fans involved,” continued Wallrapp. “All of the tattoos are awesome and we are more than excited that there are so many people excited to participate. We can’t wait to see who the fans choose as the champion.”

While the Hoth isn’t new to fan attention, this most recent contest is really putting all the power in the hands of the fans. Each contestant is hoping for the most votes, and fans are encouraged to come back and vote for each round to ensure the very best is awarded the title of champion and the $1,000.


The Hoth is actually an acronym, which stands for Hittem Over the Head. What this means, well that is really subjective, but according to the company, it means to bludgeon with awesomeness. The Hoth is a word that can be used as a noun or a verb and those in the company encourage everyone to have a bit of fun with it. Hoth was begun more than six years ago when the industry was full of sketchy service providers that didn’t offer very good support. The team at the hoth is set to change all that by providing SEO services that surpass the competition.